62160X   Gap-bed Lathe

62160X   Gap-bed Lathe Technical Parameter:

Model	Unit                                         62160X
Swing over bed	mm	1600
Swing overgap	mm	2110
Swing over carriage	mm	1280
Maximum turning length	mm	1500-16000
Maximum weight of workpiece batween centers	kg	8000   /10000
Width of the bed	mm	755
Spindle noses No.	ISO	A2-15
Diameter of spindle front bearing	mm	200(8)
Diameter of spindle hole	mm	130     100
Taper hole of spindle		Metric No.140
Number of spindle speeds		Manual operating
Range of spindle speeds	r/min	3.15-315   2.5-250
Main motor power	kw	AC22
Rapid travelling speed of motor power	kw	1.5
Section of tool shank	Mm/ in	45x5    (1.8x1.8)
Swivel angle of tool post		±90°
Travel of transvers tool post	mm	200
Travel of longitudinal tool post		400
travel of cross slide	mm	720
Rapid travelling speed of　longitudinal tool post	mm/min	935
Rapid travelling speed of transverse	mm/min	1870
Rapid travelling speed of longitudinal	mm/min	3740
Metric threads number and range	mm	45,1-120
Inch threads number and range	T.P.I.	42,30-1/4
Modul threads number and range	mm	46,0.5-60
Diameter pitch threads number and range	D.P.	48,60-0.5
Longitudinal number and range of feeds	m/rev	97,0.064-12
Transverse number and range of feeds	m/rev	97,0.032-6
Longitudinal tool post number and range of feeds	m/rev	97,0.016-3
Diameter of tailstock quill	mm	160
Taper hole of tailstock quill		Metric No.80/   Morse No.6
Travel of tailstock quill	mm	300