	6132
	6132A
	6232A
	6132E
	6232F
	6232G
	6232G1
	6132H
	6232H
	6132M
	6232M1
	6232M2
	6232M3
	6132S
	6232S
	6230
	6230E
	6230W
	6132U
	6132V
	6232V

Location: All products->Machine Tool->Lathe->Swing over bed 320mm lathe->6230W

6230W Gap-bed Lathe

6230W Gap-bed Lathe,Swing over bed,Machine Tool.

6230W Gap-bed Lathe Technical Parameter:

Model	Unit	6230W
Swing over bed	mm	330
Swing over carriage	mm	210
Swing over gap	mm	510
Distance between centers	mm	1000
Lathe chuck diameter	inch	6”
Lathe chuck type		3 Jaw Self Centering
Spindle taper		Morse.5
Spindle through bore	mm	38
Spindle Speeds	rpm	9 steps 70-2000
Metric threads	mm	17 kinds 0.45-4
Inch threads	inch	24kinds (4-1/2 ----64 1/n”)
Moulder threads	π*m	17kinds 0.45-4
Diametral threads	π*m	20kinds 15-192 1
Longitudinal feed rates	mm/r	0.06-1.60
Cross feed rates	mm/r	0.015-0.4
Tailstock barrel Taper		Morse.3
Tailstock barrel travel	mm	100
Overall Dimensions	mm	2000x800x1400
Net weight	kg	800

6230W Gap-bed Lathe Electrical Specifications:

Horsepower	1500w	2hp
Motor Type	A/C
Phase	Single or Three phase
Voltage	110 or 220 Volts

6230W Gap-bed Lathe Features:

Large, 38mm(1-1/2”) spindle bore

Gear drive power

New enclosed quick-change gear box

Removable gap/increase your swing

Precise cuts with cross & longitudinal powerfeed
Large diameter holds jobs up to 510mm(20”) with removable gap
Induction hardened grinded bedway
Easy access to safety switches

Gear drive power & large spindle bore

It can be gear drive power
on 2HP motor and the spindle bore is 38mm(1-1/2”)

Threading Dial & Half Nut

It can be realized power feed on longitudinal or crosswise.
Cut and chase threads like a master machinist. you can cut right-and left-hand threads in metric and inch. etc. with has control rod, it’s easier to handle.

Standard Accessories:

1. 3-jaw chuck(φ160 )
2. Tool post wrench
3. Dead centers(MT#3、MT#5)
4. Allen wrench(3,4,5,6,8,10)
5. Screw driver（φ6×100）
6. Double open end wrench(12~14,17~19)
7. Single open end wrench(24)
8. Oil gun
9. Drilling chuck
10. Taper arbor
11. Change gear(1 SET)
12. Machine base

Optional Accessories:

1. Steady rest
2. Follow rest
3. Turning tool set
4. Face plate
5. 4-jaw chuck(φ200)